Skip to main content

Snijders | Incubators

Laboratory incubators provide a controlled, contaminant-free environment for safe, reliable work with cell and tissue cultures, by regulating the temperature. Microbiological incubators are used for the growth and storage of bacterial cultures.
Snijders Labs has been manufacturing laboratory cooled incubators with volumes up to 500 liters for over 30 years to be used in life- and bioscience, clinical and industrial applications.

Froilabo offers a full range of incubators with natural convection, air forced and forced cooling and volumes from 60 liters to 120 liters to cover most laboratory applications.
Froilabo also provides care for different user requirements, specifically with regard to cleaning and disinfection. The thermal disinfection cycle at 160°C for 2.5 hours in accordance to Pharmacopea brings an additional level of bacteriological safety.


Snijders | Cooled Incubators

The Snijders LABS cooled incubators are not just designed for general microbiological, food, water and medical research, but also for tenability tests or long term storage. It's wide temperature range and flexible programmer (is optional) allow these incubators to be used for basically any standard test. Another important feature is the fast recovery of temperature to within approximately 0.3 °C after a door(s) opening. All the platform, guide sleeves and fixing rungs are easily removed leaving a seamless chamber(s) for ease of cleaning. Available in an upright model with 1 chamber (EB1E) or 2 chambers (EB2E)

Key features:

  • temperature range: -10°C/+60°C
  • a potential free contact for external alarm
  • doorgrip incl. cylinder lock
  • stainless steel interior
  • simple operation
  • modern and practical design
  • quiet energy saving Optyma compressors
  • no dehydration, no need to use Petridishes etc.
  • volumes: 494 ltr or 2x 231 ltr

  • Optional:
  • 2 compartments, independent controllable
  • with or without cooling.
  • View Brochure


    Froilabo | Natural Convection BSP

    Natural convection is designed for long duration incubation, incubating substrates sensitive to dryness and also powder applications.

  • Temperature range from ambient +5°C to 65°C
  • Volumes: 65L 125L and 245L
  • Control sensor Pt 100
  • Digital Display 1/10° accurate (actual and set-point)
  • Timer: 99h 59 min
  • High and low temperature visual alarm
  • Over-temperature safety according to the European standard, NF EN61010-2-010.
  • Conforms to standards, EN60068-3-11 and NFX15-140
  • EASY CLEANING inner stainless steel chamber (flat surface, removable shelf holders)
  • View Brochure


    Froilabo | Forced Convection BP/BE

    The BP (Performance) incubator range was developed in order to meet the needs of biological and medical analysis laboratories, allowing hospital or private laboratories to have higher requirements than present standards.

    The BE (Expert) incubator has in addition to the BP incubator the following benefits: a thermal disinfection cycle (@160°C for 2.5 hours and an adjustable fan speed).

  • Temperature range: ambient +5°C to 100°C (excellent temperature uniformity less than 0.5°C @ 37°C)
  • Rapid temperature set-point and homogeneity achieved with internal fan
  • Adjustable air control (0 to 100%)
  • Volumes 60L to 245L
  • Left side cable entry port diam. 30 mm
  • Inner safety glass door
  • View Brochure


    Froilabo | Forced Convection Refrigerated BRE

    The Expert Refrigerated incubators allows for working at temperatures from 0°C to 100°C. Ideal for micro-organisms, fungus and microbiological cultures.

  • Temperature range: 0°C to 100°C
  • Powerful refrigerating unit delivers effective, fast and precise cooling
  • Rapid temperature set-point and homogeneity achieved with internal fan
  • Volumes: from 60L, 120L and 240L
  • Cable entry port to enable validation and calibration with additional probes
  • Programmable controller with 8 settings to enable temperature cycle up to 4 temperatures
  • Ramp and temperature setup
  • RS485 port for data transfer (optional software and cable to be ordered separately)

  • Advantages:
  • High temperature homogeneity (less then to 0.5°C to 37°C)
  • Adjustable fan speed
  • Adjustable air exchange (0 to 100%)
  • Dry heat disinfection cycle will ensure optimum decontamination of the equipment
  • View Brochure


    BRS Mission Statement:
    We make your innovation our goal!


    Other companies

    Beun-De Ronde b.v.
    BioSPX b.v.
    AddspeX b.v.


    Beun - De Ronde Serlabo

    Steenweg op/
    Chaussée de Ruisbroek 290b

    BE-1620 Drogenbos

    +32 (0)2 3342270